1/2″ to 4″ Industrial Sealing Washers PVC Molded Construction (SW Series)
When The Elements Can’t Settle for 2nd Best, AMFICO Sealing Washers Safe & Secure
Sealing washers are for a positive seal of the shoulder of a fitting and the locknut to the opening in an enclosure or box. Install BETWEEN the locknut and outside entry of your enclosure. It provides a liquid tight seal against water and oil. Precisely designed and uniformly molded assures proper installation.
It will provide a NEMA or IP rating in wet locations on rated enclosures. Consult the code for proper rating with the conduit and enclosure you are installing. The PVC gasket is UV Rated for outdoor use.
SW Series can be readily used with AMFICO Cord Grips, Rigid, and Liquid Tight Fittings,
when combined with our Locknuts you can be assured of an environmental seal and
establish a NEMA rating with the appropriate enclosure.
Material Construction: PVC gasket UV Rated
Designed for use with raintight, watertight, and oil-tight enclosures
PVC Gasket Provides a Positive Seal Against Water, Oils & Other Liquids
Tightens Without Deformation
UL Listed to 514B
NEMA Standard FB1
Federal Standard A-A-50553
Conforms to UL Standards: 514B, 467
CSA Standard: C22.2 No. 18F
CA Prop 65 Compliant