AMFICO Steel EMT Fittings, Made in the USA

AMERICAN Made, EMT Steel Fittings 1/2″ to 4″  UL Listed
Out Performs and Installs Faster Than Any Other EMT Fitting Made!
End the Frustration with Zinc Die Cast EMT Fittings!
Stop The Block Mentality of Malleable Iron EMT Fittings!
AMFICO EMT Fittings Provide Value to Your Job Without Adding Cost!

SPEC-grade Steel EMT Fittings ™

Alloy Steel EMT Fittings  Product Groups EC & SS
Certified Made in the USA
Size Range: 1/2” – 4″              
View Product Brochure →

Set Screw (SS) & Compression (EC), Rain Tight-Option featuring Gold Edition Identification Nuts
MIL-Std 810 Vibration Tested and Rated for Seismic Zones 

Featuring, AMFICO EZ-TORQUE Compression ™ Nuts

• Full flat hex surfaces on body & compression nut for EZ-Torque
• Couplings utilize a ridge center stop for easy identification of adequate conduit sealing within the coupling
• Set screw fittings with a # 2 STEEL combo-head screw
• Thick, steel conduit locknut provides a strong, secure installation

All connectors are available with or without an insulated throat. The nylon insulator is a UL component that protects conductors, decreases wire-pulling effort, and averts thread damage during handling.

Thin Wall, Lightweight Die Cast Fittings CRACK Under Stress, Often by Simply Properly Torquing the Set Screw View Video

Malleable Iron vs Steel vs Die Cast

Click on picture to enlarge

Why use a residential inferior thin wall die-cast fitting in your institutional and industrial applications? When you can use American made steel that outperforms, outlasts, and installs faster than any EMT fitting in the market. Save Time  & Save Money Using Steel EMT Conduit Fittings. 

AMERICAN FITTINGS EMT fittings are the professionals’ choice for consistent stress-free installations and the ideal choice for long conduit runs. AMFICO EMT Set Screw & Compression Connectors and EMT Couplings are the superior alternatives to thin wall die cast products. Using our EMT fittings you are assured they are Made in the USA and fully listed to UL specifications. Our EMT fittings are testing to MIL-810 vibration rated for seismic zones, making them the ideal electrical fitting choice for seismic zones.

EMT Product Performance, We Offer a
100% Product Guarantee.


  • Fully Machined from Solid Steel EMT Fittings Outperform and Easier to Install than Inferior Die Cast Products
  • Compression and Set Screw- EMT Connectors and Couplings are  manufactured from the highest quality USA steel bar stock and brightly zinc plated for full corrosion resistance.
  • Connectors are available with or without an insulated throat. The nylon insulator is a UL component that protects conductors, decreases wire-pulling effort, and averts thread damage during handling.
  • Connectors are also furnished with an industrial grade locknut to aid in bonding between the fitting and box or enclosure. Designed with a superior steel construction and precise clean threads, locknuts will tighten without distortion and will not loosen from vibration.
  • All our EMT fittings carry a concrete tight listing and connection when taped.
  • 1/2 ” to 4″ EMT Compression are UL listed Rain Tight.
  • Conduit hangers with bolts and EMT steel straps are available to secure and support EMT conduit to a mounting surface.

EZ-TORQUE EMT Fittings ™
Torque Right & Tight  with Less Effort


Buy With Confidence

The manufacturing and assembly of our EMT fittings fully conform to the Buy American, Buy American Provisions, Trade Agreements Act and the American Recovery and Reinvestment (ARRA) and section 1605 of that act, Public Law 111-5. A requirement for all federally funded projects and many state and municipal jobs. Material Certs are furnished upon request.

  • In addition to UL and CSA Listings, AMFICO EMT Made in USA fittings meet MIL-STD 810 DOD testing for vibration, a requirement in many federal and state facilities.
  • AMFICO EMT Raintight connectors are UL Listed for Rain Tight and are ideal for use in wet locations when connecting EMT conduit and enclosures.
  • Our EMT set screw fittings will provide a concrete tight connection when the set screw is taped




t: 800-221-5268   |   f: 201-664-1175

17-10 Willow Street, Fair Lawn NJ 07410

e: info @ amftgs . com

Sales Office Locator →



Industry Affiliations

naed nemra logos