American Fittings Corporation Electrical Fittings

Steel Electrical Fittings, Made in the USA, Since 1946

Don’t Buy Our Fittings Because They’ re Made in America. . .

Buy Them Because They Provide the Ultimate Value to You.

AMFICO Alloy Steel Electrical Fittings
WILL Exceed Your Expectations NOT Your Budget!

Manufacturing all our products in the US, we will meet your most demanding challenges in this ever-changing global marketplace. DON’T BE MISINFORMED. . . ALL OUR PRODUCTS  COMPETE AGAINST ALL COMPETITION   With a complete range of manufactured alloy steel electrical fittings, we can exceed your expectations for quality of products, service, and value. AMFICO draws on over 70 years of manufacturing and engineering innovation to provide customers and industries with the highest value product. American Fittings on time, to spec, and at budget exceeds other competitors and delivers a total solution for your fitting requirements. It’s time to Think American!

AMFICO’s  QSV Fitting Solutions™  With a 100% Performance Guarantee

AMERICAN FITTINGS’ corporate mandate is to always combine Quality, Service, and Value into all our product solutions.  This creates an enhanced value benefit through our distributor partners to always fulfill customer needs while exceeding their expectations. AMFICO products are easier to install and will outperform any product in the world.  In fact, many of our products are furnished with a 100% Performance Guarantee.  Consider that many of our products have been tested for performance in seismic environments.  Since our alloy steel electrical fittings are  Made in the USA they meet ALL state and federal requirements for government-funded projects. From OEM equipment builders to job site installations every AMFICO alloy steel electrical fittings will save labor and provide a more secure connection for your conduit and cord.

Steel Electrical Fittings Out Perform and Outclass
Die-Cast and Malleable Iron
AMFICO, Twice the Strength  1/2 the Size and Weight!

Our products are manufactured from domestic alloy steel. They outperform and outclass die-cast and malleable iron fittings. This provides a faster and more secure installation and application. See the difference over die-cast or malleable iron.

Physical

Malleable Iron vs Steel vs Die Cast

click on image to enlarge view

Chemical

Malleable Iron vs Steel vs Die Cast

click on image to enlarge view

SPEC-grade Industrial ™  Alloy Steel  Electrical Fittings Product Groups

Cord Connectors Liquid Tight  Steel EMT Fittings      Steel Rigid – IMC Fittings
Spectrum_cord_grip_red_web2 LT_Connector_s3_WEB_P-047998 EMT_SS_connector_web rigid_coupling_web
Size Range: 1/2” – 2 1/2” Size Range: 3/8” – 4″ Steel Size Range: 1/2” – 4″ Steel Size Range: 1/2” –  4” Steel
Straight  |  90°  |  45° Straight  |  90°  |  45° Set Screw  |  Compression Set Screw  |  Compression
Wire MeshGround Lugs Wire Mesh, Ground Lugs Rain Tight & Concrete Tight RainTight & Concrete Tight
Stainless, Aluminum Rigid & EMT Adapters Avail. Hangers, Straps, Locknuts GBs,RBs,Hubs,3 Piece
Certified Made in USA Certified Made in the USA Certified Made in the USA Certified Made in the USA
UL, CSA UL, CSA UL, CSA UL, CSA
Seismic Rated MIL-Std 810 Seismic Rated MIL-Std 810
EZ-TORQUE Design EZ-TORQUE Design EZ-TORQUE Design EZ-TORQUE Design




Find Out More→ Find Out More → Find Out More →  Find Out More → 
View Catalog Sheets→ View Catalog Sheets→ View Catalog Sheets→ View Catalog Sheets

View and Download Our Electrical Fitting Product Catalog Printable →

Check Out Our NEW NEXT Generation Fittings

Fast Page Links for These Products

TECK Fitting  Go to →
Rigid Conduit Enlargement Fitting  Go to →
AC MC Connector  Go to →
SPEC flex Connector for FMC Greenfield  Go to →
AMFICO WT Hub – Replaces Myers Hub  Go to →

Buy With Confidence

The manufacturing and assembly of AMFICO  Fittings, including EMT, Rigid, Cord Grips, and Liquid Tight Fittings fully conform to the Buy American, Buy American Provisions, Trade Agreements Act and the American Recovery and Reinvestment (ARRA) and section 1605 of that act, Public Law 111-5. A requirement for all federally funded projects and many state and municipal jobs. Material Certs are furnished upon request.UL_CSA_amfico


 

Browse & Safely Download

Click Image to Learn More

Contact

t: 800-221-5268   |   f: 201-664-1175

17-10 Willow Street, Fair Lawn NJ 07410

e: info @ amftgs . com

Sales Office Locator →

 

CATALOG

Industry Affiliations


naed nemra logos