AMFICO Rigid Conduit Electrical Fittings

Demanding Conditions, Demand the Best


and the World’s BEST is AMERICAN FITTINGS.



Erickson Couplings

Industrial Grade Locknut_web

NEW SPEC-grade LOCKnut

Click Any image  to Enlarge

ground_hub_with lug_web

NEW Grounding Bushings



 Click Any Image to Enlarge

Download Spec Sheet Library

Rigid Product Spec Sheets →

Rigid Product Cat # Index→


Alloy Steel Rigid IMC Conduit Electrical Fittings  Product Series NT & SNT
Certified Made in the USA
Size Range: 1/2” – 5″
Set Screw (SNT) & Compression (NT) Rain Tight *
MIL-Std 810 Vibration Tested and Rated for Seismic Zones
More Info

Featuring AMFICO”s Unique EZ-TORQUE Design

AMFICO’s alloy steel  rigid electrical fittings surpass all other products for ease of use and strength. True, other companies pioneered the product but at AMERICAN FITTINGS we perfected it. While, many are going off shore to source and resell, we continue to make the best in the USA. Since our products are solid steel and are produced on CNC machines, you can count on consistency of wall thickness, uniform ID’s and threads that thread easily but seal tight.  

Truth Is, When It Comes to Rigid Electrical Fittings, Zinc Die Cast is NOT Very Rigid !
Twice the Strength and Hardness of Die Cast Fittings 

Our rigid fittings are the professionals’ choice for consistent stress free installations and the ideal choice for long conduit runs. AMFICO Rigid Set Screw & Compression Connectors and Rigid Couplings are the superior alternative to inferior thin wall die cast electrical fittings. Using our rigid electrical fittings you are assured they are Made in the USA and fully listed to UL specifications. Our rigid electrical conduit fittings are tested and rated to MIL-810 vibration rated for seismic zones.

Malleable Iron vs Steel vs Die Cast Click on image to enlarge


  • Fully Machined Rigid Conduit Fittings Nuts and Bodies Outperform and Easier to Install than Inferior Die Cast Products
  • Compression and Set Screw- Connectors and Couplings are  manufactured from the highest quality USA steel bar stock and brightly zinc plated for full corrosion resistance.
  • Connectors are available with or without an insulated throat. The nylon insulator is a UL component that protects conductors, decreases wire-pulling effort, and averts thread damage during handling.
  • Connectors are also furnished with an industrial grade locknut to aid in bonding between the fitting and box or enclosure. Designed with a superior steel construction and precise clean threads, locknuts will tighten without distortion and will not loosen from vibration.
  • All our Rigid fittings carry a concrete tight listing when the set screw is taped per NEC Code.
  • 1/2 ” to 2″ Rigid Compression Fittings are * UL rated Rain Tight
  • 1/2 ” to 4″ Feature AMFICO Unique EZ-TORQUE Compression

Rigid Product Performance, We Offer a
100% Product Guarantee.

AMFICO Offers a Full Line of Industrial SPEC-grade™ Rigid Conduit Products

EZ-TORQUE Rigid Conduit Fittings ™
Torque Right & Tight  with Less Effort



Buy With Confidence

The manufacturing and assembly of the rigid electrical conduit fittings  featured fully conform to the Buy American, Buy American Provisions, Trade Agreements Act and the American Recovery and Reinvestment (ARRA) and section 1605 of that act, Public Law 111-5. A requirement for all federally funded projects and many state and municipal jobs. Material Certs are furnished upon request.

  • In addition to UL and CSA Listings, AMFICO rigid electrical fittings meet MIL-STD 810 DOD testing for vibration, a requirement in many federal and state facilities.
  • AMFICO Raintight connectors are UL Listed for Rain Tight and are ideal for use in wet locations when connecting EMT conduit and enclosures.




* Erickson as shown is a registered trademark of Thomas & Betts Corporation




Browse & Safely Download

Click Image to Learn More


t: 800-221-5268   |   f: 201-664-1175

17-10 Willow Street, Fair Lawn NJ 07410

e: info @ amftgs . com

Sales Office Locator →



Industry Affiliations

naed nemra logos