VA Hospital Requirements Electrical Fittings

 

 

Web-Ready-VHA-Excellence-logo

 

 Reprints and Links via 

DOC] Section 14 21 00 – ELECTRIC TRACTION ELEVATORS
www.cfm.va.gov/til/spec/142100.doc
RESTRAINT REQUIREMENTS FOR NON-STRUCTURAL COMPONENTS: Requirements for seismic restraint of non-structural components. E. Section 26 05 11, REQUIREMENTS FOR ELECTRICAL INSTALLATIONS: General electricalrequirements that are common to more than one section.

[DOC] Section 14 24 11 – HYDRAULIC CARTLIFT
www.cfm.va.gov/til/spec/142411.doc
FOR NON-STRUCTURAL COMPONENTS: Requirements for seismic restraint of non-structural components. E. Section 26 05 11, REQUIREMENTS FOR ELECTRICAL INSTALLATIONS: General electrical requirements that are common to more than one section. F. Section 26 05 21,

www.cfm.va.gov/til/spec/142400.doc
STRUCTURAL COMPONENTS: Requirements for seismic restraint of non-structural components. E. Section 26 05 11,REQUIREMENTS FOR ELECTRICAL INSTALLATIONS: General electrical requirements that are common to more than one section. F. Section 26 05 21, LOW-

www.cfm.va.gov/til/spec/142111.doc
Power, Electrical and Conduit, Metal, Flexible HH-I-558C Insulation, Blankets, Thermal (Mineral Fiber, Industrial Type) W-F-408E Fittings for Conduit, Metal, Rigid (Thick- Wall and Thin-wall (EMT) Type) RR-W-410 Wire Rope and Strand TT-E-489J Enamel, Alkyd,

www.cfm.va.gov/til/spec/141211.doc
for seismic restraint of non-structural components. E. Section 26 05 11, REQUIREMENTS FOR ELECTRICALINSTALLATIONS: General electrical requirements that are common to more than one section. F. Section 26 05 21, LOW-VOLTAGE ELECTRICAL POWER CONDUCTORS AND

www.cfm.va.gov/til/nca/260533racboxelecsys.doc
b. Locknuts and bushings: As specified for rigid steel and IMC conduit. c. Set screw fittings: Not permitted for use with aluminum conduit. 3. Electrical metallic tubing fittings: a. Fittings shall meet the requirements of UL 514B and ANSI/ NEMA FB1. b.

www.cfm.va.gov/til/spec/260533.doc
conduit is to be used. Remove if not required by project. //2. Rigid aluminum: Shall conform to UL 6A and ANSI C80.5.// 3. Rigid intermediate steel conduit (IMC): Shall conform to UL 1242 and ANSI C80.6. 4. Electrical metallic tubing (EMT): Shall conform

www.cfm.va.gov/til/spec/275319.doc
84 00 – Firestopping. 9. 26 05 11 – Requirements for Electrical Installations. 10. 26 05 21 – Low Voltage ElectricalPower Conductors and Cables (600 Volts and Below). 11. 26 05 26 – Grounding and Bonding for Electrical Systems. 12. 26 05 33 – Raceways

www.cfm.va.gov/til/spec/28052833.doc
and training. J. Section 31 20 00 – EARTH MOVING. For bedding of conduits. 1.3 DEFINITIONS SPEC WRITER NOTE: Retain abbreviations that remain after this Section has been edited. A. EMTElectrical metallic tubing. B. ENT:Electrical nonmetallic tubing.

www.cfm.va.gov/til/spec/270533.doc
As specified for rigid steel and IMC conduit. c. Set screw fittings: Not permitted for use with aluminum conduit. 3.Electrical metallic tubing fittings: a. Fittings shall meet the requirements of UL 514B and ANSI/ NEMA FB1. b. Only steel or malleable

Share This Page ViaEmail this to someoneTweet about this on TwitterShare on FacebookShare on LinkedInShare on Google+Pin on Pinterest

Browse & Safely Download

Click Image to Learn More

Contact

t: 800-221-5268   |   f: 201-664-1175

17-10 Willow Street, Fair Lawn NJ 07410

e: info @ amftgs . com

Sales Office Locator →

 

Industry Affiliations


naed nemra logos